Did your computer just crash without sending a warning? Or, it just stopped immediately before the booting process is complete and then displayed the BSOD Error NMI_HARDWARE_FAILURE (Error Code 0x00000080) on your screen? This article rightly dedicated to fixing your problem.

If you installed new software or hardware, restarted your system and suddenly the process stopped, several this must run in your mind. Is the hardware/software incompatible or it's outdated? And again, was the space in the RAM enough to accommodate them? Most of the BSOD errors have common symptoms. For this reason, identifying the exact symptom and cause for each error is hard to define unless you can state any action you did on your computer before the error if any.

For better and easy fixing of 0x00000080 error, we’ll cover two parts on this subject:

Part 1: Reasons for the error NMI_HARDWARE_FAILURE (Error Code 0x00000080), and

Part 2: Solutions to the BSOD error NMI_HARDWARE_FAILURE (Error Code 0x00000080) 

Why should these two parts matter to you? One reason- a specific cause of this error can easily be fixed selecting the specific solution provided without having to do guesswork. 


Part 1: Reasons for the error NMI_HARDWARE_FAILURE (Error Code 0x00000080)

Faulty hardware is an eminent cause of BSOD errors. In this scenario, faulty hardware can either be incompatible with the already existing operating system or have a bad memory. Connecting hardware in a corrupt computer port is also another cause. Overheating of power supply cables leads to malfunctioning of hard drivers and then a BSOD error.

Installing or updating Graphics Card drives, driver disks, and computer programs are reported to cause this error. Certain software issues often lead to corrupted Windows Registry. Similarly, programs and files corrupted by a virus can affect registry files and thus cause 0x00000080. 


Part 2: Solutions to the BSOD error NMI_HARDWARE_FAILURE (Error Code 0x00000080)

Despite BSOD errors being not a common error, resolving them isn’t a great challenge, especially if you aren’t a first time PC user and can dismantle all the cable connections.

To fix Stop errors, it’s recommended you start resolving the possible minor causes. Here are some of the tips to follow:

  • Check all connections to the computer and if possible disconnect and connect each and every cable and inspect to see whether any is faulty. Restart your PC and wait to give it some minutes and check the power cables are overheating. Problem not solved? Try this:
  • Virus attacks happen at any time. Ensure the computer antivirus is up to date and then run a scan. Once completed, reboot your PC. 
  • Uninstall newly installed third party software and run a clean boot.

Stop errors are mostly caused by hardware malfunction or failure, now apply the solutions below and fix that error on the blue screen of death.

Solution 1: Run the Blue Screen Troubleshooter

Blue Screen Troubleshooter a built-in tool found in Windows 10 helps in fixing BSOD errors. It’s located at the Settings Troubleshooters page.

Step 1: Press the combination keys Win+ I to open the settings page.

Step 2: Down the Update & Security menu is Troubleshoot, click on it, and then select Blue Screen from the options on the right-hand side.

Step 3: Tap on the Run the troubleshooter to start running the Blue Screen Troubleshooter.

Step 4: Follow the on-screen prompts to the last option. To completely fix this error, reboot the computer in Safe Mode. This is the procedure:

  1. Start by rebooting your computer. In case of the Windows popup, restart again and interrupt the process by tapping F8. The Advanced Options page will show up.
  2. Use the arrow keys to navigate the Advanced Options page and then choose Safe Mode with Networking. Press it and you are ready to restart in Safe Mode.

Solution 2: Uninstall, update, or Rollback unnecessary drivers including Graphic cards drivers

Damaged drivers are known for causing the NMI_HARDWARE_FAILURE error. To fix them, you can update, rollback, or uninstall. Here are the steps:

Step 1: Always remember to start by rebooting the computer in Safe Mode.

Step 2: In combination, tap the Windows + R keys to open the Run mode.

Step 3: In the Run box, type devmgmt.msc and press OK or Enter.

This is to open Device Manager. On the drop-down menu are all the device drivers displayed.
Step 4: Look for the Display Adapters and tap on it. Select on all the drivers you would wish to uninstall by right-clicking Uninstall Device on each chosen drive.

Step 5: Restart your computer.

If it restarts, go to the settings page and check for any available updates and then update selectively and carefully.

Solution 3: Check on your computer memory

Firstly, check and ensure they are of the same frequency. Do you use adapters to attach the external memory devices to the computer? If yes, use the recommended devices and adapters. Using the non-recommended can cause BSOD errors because they affect program functionality.

Update your disk memory in case it’s low by installing memory chips or deleting non-essential files, folders, and programs. Also, stop background- running app since they eat in your space.

Solution 4: Run the System File Checker ( SFC) scan

To faster detect corrupt files and fix them, run the SFC scan available on your computer. Follow these steps:

Step 1: Go to the Administrator and select Command Prompt and click to open.

Step 2: Type sfc /scannow and hit Enter

Wait for the process to complete and restart your computer.

Solution 5: Toggle first startup

To turn off a fast startup, do this:

  1. On the search box, type Power Options, and press Enter.
  2. Select Choose what the power buttons do by clicking on the left side.
  3. Under the Shutdown settings, change the selected status of Turn on fast startup and then click Save Changes.


Now that you’ve read the solution on how to fix BSOD Error NMI_HARDWARE_FAILURE (Error Code 0x00000080), select the most applicable based on what you suspect is the cause of the error. Otherwise, you can try the advanced way to troubleshoot the BSOD error.

Just to repeat, always remember to restart your computer in Safe Mode before trying any other solution to fix BSOD errors.

Share To: